HEAL-A-SEALTM - THE FAST, EASY, AND LOW COST BLOWN HEAD GASKET REPAIR KIT!
THE ULTIMATE LEAK SEALER SOLUTION FOR ALL COOLING SYSTEM PROBLEMS WHICH WILL ALSO PERMANENTLY FIX WARPED OR CRACKED ENGINE HEADS, EVEN CRACKS IN ENGINE CYLINDER BLOCKS!
IT WILL SAVE YOUR ENGINE AND YOU WILL SAVE YOUR MONEY!
If your Engine has any of the symptoms below, we have THE LOW COST SOLUTION! Read on!
3 DIAGRAMS TO HELP VISUALIZE THE SCOPE OF COOLING SYSTEM PROBLEMS
FOR FULL DETAILS ON RELATED ISSUES CLICK ON ANY OF THE 3 IMAGES BELOW.
Although Coolant / Water in the Oil is actually a common and frequent problem (much more frequent than Oil in the Coolant!), it is truly impossible to permanently and reliably fix either one of these Cooling System and Lubricating System problems by any other mechanical methods, or other chemical products!
That is exactly why repairing any of those particular Engine Problems is anything from hard, to impractical, (too expensive!) ... to just totally impossible - except when using the HEAL-A-SEALTM REPAIR KIT!
|Yes, HEAL-A-SEALTM REPAIR KIT is again the only product on the market which will, besides fixing all the
Blown Head Gasket issues, successfully - and PERMANENTLY
- also repair the
CRACKS in the ENGINE HEAD as well as repair the CRACKS in the ENGINE BLOCK.
All that is because HEAL-A-SEALTM has one Indispensable Quality - unlike any other product:
That 'Indispensable Quality' is the tremendously high level of simultaneous RIGIDITY - and FLEXIBILITY - in its molecular structure ... which is something that no other product has achieved, and which is a vital characteristic ABSOLUTELY ESSENTIAL for a permanent fix!
And HEAL-A-SEALTM REPAIR KIT will PERMANENTLY FIX Both INTERNAL AND EXTERNAL types of Cracks on Engine Heads, as well as the Engine Cylinder Blocks - as per the small 'chart' below.
It will do so even where other products have failed!All it takes is just following the Step by Step Instructions in the Manual - or the 24/7 Tech Support will 'walk you through it' - if needed!
explained above, any of these Cracked Head or Cracked Block indicators
are also Engine Problems which really can NOT be fixed by any
other means or products, and there would be absolutely NO other
alternative, except for just replacing
that Engine - if was it not for our product, the HEAL-A-SEALTM REPAIR KIT!
In addition, HEAL-A-SEALTM REPAIR KIT will turn the dilemma of HOW to change a Head Gasket and/or HOW to change a Cylinder Head into much less of a daunting task!
Right down to the level of that proverbial 'Back-Yard Mechanic' ... and down to no more of a skill or knowledge than what is required for performing a more mundane task of just doing a Cooling System Flush - instead.
...And where the only other concern will be how to make sure that HEAL-A-SEALTM penetrates into that BREACH between the Cooling System and the Combustion Chamber of the FAULTY / LEAKING CYLINDER ... which is indicated with EITHER ONE (OR BOTH) OF THESE CONDITIONS:
But if this Engine 'Diagnostics' process first, and then the Engine Treatment second, sounds slightly overwhelming to an inexperienced Do-It-Yourselfer - not to worry! The User Manual explains it ALL!
Yes, there is a whole Booklet of a Manual which explains everything from 'A to Z'; all the Theory, all the Practice, and all the Step by Step procedures, with 'HOW TO' instructions throughout - from the really very quick and simple Engine Diagnostics ... to the specific Treatment Steps Segment - all with VERY DETAILED explanations for each procedure!
And also, for even less 'worry', and beyond all the Step by Step instructions in the Manual, there is the ultimate peace of mind of knowing that you are never 'on your own' and that you can always call the TOLL-FREE 24/7 Tech Support at 1-888 - 256-0403 EXT. 4 for any help or question you might have - anytime!
SO IF YOUR CAR OR TRUCK IS WORTH A VERY MODEST INVESTMENT OF UNDER (OR AROUND) $100,
THEN YOU HAVE COME TO THE RIGHT PLACE!
WE WILL SAVE YOUR ENGINE! AND YOU WILL SAVE YOUR MONEY! BIG TIME!
And here, besides our TOP PRODUCT, WE ARE ALSO THE TOP EXPERTS ON THE SCENE!
And your calls are never taken by any 'call center agent' - you will always talk to the Tech Support Expert!
So, we will supply you not only with the HEAL-A-SEALTM Repair Kit, but will also supply you with the COMPLETE SOLUTION and the UNPARALLELED 24/7 TECH SUPPORT - TOLL-FREE - which is Guaranteed to fix the problem!
And make it STAY FIXED... Also GUARANTEED!
MOST OF THE ABOVE INFO WAS FOR THE READERS WITH SOME TECHNICAL BACKGROUND!
BUT WHAT FOLLOWS RIGHT BELOW IS NOW ALL SUMMARIZED FOR THE NON TECHNICAL READERS...
It is, in the simplest terms, a special 'High Temperature / High Pressure Combustion Gasses and Coolant 'Stop Leak' - for the Cooling System and Combustion Chamber of any engine - Gasoline or Diesel and with any type of Engine Blocks or Cylinder Heads - Cast Iron or Aluminum! In addition to this basic purpose and basic function, HEAL-A-SEALTM is also a COMPLETE COOLING SYSTEM STOP LEAK which will also stop ALL types or Radiator leaks, including in radiators with PLASTIC RADIATOR TANKS, or any other Cooling System leaks, for that matter - even the leaking HEATER CORES!
AND NOW, FOR READERS OF ALL BACKGROUNDS, SOME IMPORTANT FACTS AND BASIC ANSWERS TO THE (STANDARD) 'FREQUENTLY ASKED QUESTIONS' (FAQs) ABOUT HEAL-A-SEALTM
What is HEAL-A-SEALTM ?
What HEAL-A-SEALTM is NOT?
It is NOT just a 'Radiator Stop Leak', and it should NOT be confused with the somewhat similar but limited in function, and much lower in price products - the Radiator 'Stop Leak' Chemicals! Actually, and although it will also seal-up any Radiator (even those with plastic side tanks!) HEAL-A-SEALTM is unlike any other 'Radiator Stop Leak' as it does so much more - as explained throughout this Website.!
What will it do?
What HEAL-A-SEALTM WILL do, besides the stopping all external Cooling System leaks, is to PERMANENTLY FIX the Blown Head Gaskets, Warped or Cracked Heads, leaking or cracked Cylinder Blocks and something that no other product will do - save the Engines with the Coolant mixing in the Oil, or even Oil mixing in the Coolant! Furthermore, it will PREVENT LEAKS in newly rebuilt engines, replaced engines, or even the replaced Radiators or Heater Cores. Likewise, it will also PREVENT SEEPAGE in engines with the newly replaced Head Gaskets, new Intake Manifolds (or replaced Manifold Gaskets only), even the new water pumps.
Because HEAL-A-SEALTM is specially formulated with the 'space age ingredients' to get activated in the 'Hot Section' of the engine - in the Cylinder Heads, and the Cylinder Blocks ... and especially so in the weakest part of the Engine Combustion Chamber - the Head Gasket located between the Cylinder Heads and Cylinder blocks!
HEAL-A-SEALTM - How Does It Work?
Here is the answer to that proverbial 'How It Works' question:
Those same 'space age ingredients' are at the heart of the HEAL-A-SEALTM Repair Kit and they are activated by the combination of high temperatures and high pressures in the Cooling System and in the Jackets and Passages which surround the Combustion Chamber. In a Thermo-Chemical reaction they BOND TO THE METAL SURFACES OF THE COOLING SYSTEM and act to SEAL-OFF the Cooling System from the Combustion Chamber, by penetrating any leaks (even the external ones!) and subsequently forming a strong and durable rivet-type (with 'head' at both ends) 'filling' which effectively plugs-up and seals-off the entire area of the leak.
Thereafter, when exposed to the air, it cures, and when it cures - it hardens, and when it hardens it turns into an absolutely 'bulletproof' and 'fireproof' mass which is even stronger than the original Head Gasket, and which then serves as a permanent seal, and a permanent separation, between the Coolant Passages and Combustion Chamber, or Lubrication Oil Passages, (and even as an EXTERNAL STOP LEAK ) anywhere within the Engine Heads, Cylinder Blocks and/or Head Gaskets.
On top of all this, and in addition to the basic metal bonding ingredients, there are also other ingredients to not only prevent any Electrolytic Corrosion or Rust, and/or 'Scale', from forming in the entire Cooling System, but also included are ingredients which act as a Cooling System Conditioner as well as a water pump lubricant .
All of this guarantees that the product will NOT cause or do any harm (such as 'clogging') to the Engine, Radiator, Thermostat, and/or the rest of the Cooling System, whatsoever. It also guarantees that it will provide a reliable and safe user environment with no 'side effects' whatsoever, especially when it comes to the Engine dis-assembly if it is needed any time in the future.
HEAL-A-SEALTM will penetrate into, and stay within, any leak from or into the Cooling System or Combustion Chamber where the 'prescribed' pressure and temperature combination exists. Moreover, it will create a 'HARD SHELL' which will 'Coat' the entire Cooling System, as well as all of the Cooling System passages within the Engine 'from the inside' and thus reseal the ENTIRE SYSTEM! This will not only have an additional benefit of the 'instant' increase in the Cylinders Compression but it will also result in additional protection of the Engine by preventing it from any new leaks in the future!
HEAL-A-SEALTM starts to act, quickly, effectively, and safely, as soon as the Engine reaches the operating temperature, and once the resultant High Temperatures and High Pressures have developed within the Engine's Hot Section.
In addition the basic Questions above, there are also TWO very Fundamental Questions that are asked daily:
"What makes it work so well"? ... and, "What makes it so different"?
To see the answers click on either of the questions above, or since the explanations are based on the Sketch below, you can click on the image to see the answers.
In conclusion, our HEAL-A-SEALTM SOLUTION is truly the 'right solution' - at the right price - for the fixing of a large variety of Cooling System, Engine Head or Engine Block problems - on any Engine with a Radiator - be it a Gasoline Engine - an All Aluminum Engine - (Aluminum Head and Block), or a Cast Iron / Aluminum combination Engine... or a Diesel Engine, and both, naturally aspirated - or turbo charged Engine!
In summary: ANY Liquid Cooled Engine!
The HEAL-A-SEALTM Standard Repair Kit has everything needed for the task and includes the following items:
NOTE: Cooling System Flush Kit Items are essential parts of the KIT - as flushing of the Cooling System is mandatory prior to the application.
So, if from all the above you already realize how our HEAL-A-SEALTM SOLUTION will bring your Engine 'back to life' ... please click below if you are ready now to order the HEAL-A-SEALTM STANDARD REPAIR KIT.
Or, if you would like to see our HEAL-A-SEALTM 'ADVANCED REPAIR KIT' which also includes other specialized items which are NOT readily available in all the Auto Parts Stores - and the 'tools' that will make your job much easier, faster, SAFER - and yes, even cleaner, please click on the button below.
And there is even an 'educational' Cross Section of a typical 8 Cylinder Engine.
On top of all this, you can also learn more background facts and many intricacies of the Cooling System and the related problems, their original causes; also their solutions, etc. and especially some more advanced knowledge of the actual 'treatment steps'...
Or if you have any questions, call us TOLL-FREE 24 hours a day at:
1-888 - 256-0403 EXT. 4
NO CALL CENTER, AND NO 'CALL CENTER AGENTS' HERE!
YOU WILL BE CONNECTED DIRECTLY TO A TECH SUPPORT EXPERT, INSTEAD!
Or, send us an Email to: Info@Heal-A-Seal.com
PARA INFORMACION O SOPORTE TECNICO EN ESPAÑOL OPRIMA EXT. # 5
So, are you ready to do a quick and easy Blown Head Gasket Fix - or a Cracked Head / Cracked Block Repair - on the vehicle that you drive?
The easy way! And at a fraction of the 'regular' Repair cost?
With HEAL-A-SEALTM other costly alternatives (Head Gasket replacement or Engine Rebuilding), or even the cheap alternatives (off the shelf products that do not fix the problem!), are just NOT an option!
Or, for HEAL-A-SEALTM COMPLETE PRICE LIST / ORDERING PAGES - click on 'STANDARD KIT' or 'ADVANCED KIT' button below.
... AND THE LATEST HEAL-A-SEALTM NEWS!
ANNOUNCING 2 NEW PRODUCTS!
HEAL-A-SEALTM ENGINE OIL SEALER - AND ENGINE OIL STOP BURN!
(AND SOON TO COME: TRANSMISSION STOP SLIP AND FLUID LEAK SEALER)!
Copyright © 2004 - 2014